Boilers

Whether your fuel source is natural gas, oil, propane, wood or electricity, options is the keyword when talking boilers. You can choose from many small, energy efficient units requiring very low maintenance to provide hot water and steam for your radiator or radiant heat.

Boilers can be made of cast-iron, steel, or copper heat exchange. They can use different burners and venting systems. The wall-mount condensing boiler is the design of choice for most residential applications. Homeowners, builders, and heating contractors prefer this because it has flexible venting options and is compact in design.

The first thing to consider in a residential boiler is the size. An over-sized boiler can be noisy, less efficient, and more costly. Proper size can be determined by calculating the heat load that the boiler will serve. The cost effectiveness of the boiler must be compared with different efficiency ratings. Generally, high-efficiency models are more expensive than lower efficiency ones. Your boiler has a life of 20 to 30 years, so it’s crucial to choose the right model so that long-term costs can be minimized. Your Cook’s expert will walk you through this calculation to ensure the right boiler is chosen.

Combine quality construction with innovative features and you get a much improved experience, for not a lot more.  In most cases, improvements in efficiency will more than cover any increase in cost over time.

Mod-Con (Modulating Condensing) Boilers

A Mod-Con (Modulating Condensing) Boiler will modulate water temperature according to the outdoor temperature. Modulating the BTU output to suit indoor needs, automatically adjusting to provide optimum efficiency and comfort.

High Temperature Boilers

If system requirements are for hot water of more than 150°F, a hightemperature water boiler should be considered.

Combi Boilers – Domestic Hot Water Plus Home Heating

A Combi-Boiler is a high efficiency condensing combination boiler with the capacity to supply both heat and domestic hot water for medium sized homes — enough hydronic heat for a whole house, plus hot water to run two showers and a dishwasher all at the same time.

Wood Boilers

Also know as solid fuel boilers, wood burning boilers can heat your home NewMaccomfortably and reliably. Many wood boilers are used as an “add-on” to a primary boiler. This allows for the energy savings of wood as your heat source while maintaining the convenience of oil or gas. And with proper installation many “add on” wood boilers can be used as the primary source of heat during a power outage.

Cook’s carry Newmac wood boilers.

1 items in cart

or empty cart

Slant Fin Victory Gas Medium Temperature Boiler

Slant Fin Victory Gas Medium Temperature Boiler Image
The quality built Victory VHS boiler provides everything you want in a sealed combustion boiler – chimney-less installation, economical price, comfort and safety. It is a reliable cast-iron boiler with a lifetime limited warranty.

  • Input: 60,000 to 180,000 Btu/hr
  • No chimney required
  • Economically priced

Installation versatility – no chimney required

Save construction costs and allow more living space with a Victory VHS sealed combustion boiler. A chimney is not required, so it can be installed in in a closet size space and vented directly through a wall with 3″ stainless steel piping. It’s ideal for homes, apartments, condos and any application where a chimney may not be practical or where an old chimney has deteriorated.

Flexibility In Venting

Chimney or “Type B” venting – with galvanized or stainless steel pipe. Natural draft venting for VHS 90 through VHS 180 boilers. (see manual)

Contractor Friendly Features Speed Installation and Reduce Service Time

  • Horizontal flue outlet with 3-inch connector for better performance.
  • Condensate drain is built into the flue discharge assembly.
  • Drain tube for condensate is factory installed.
  • Junction box for power connection.
  • Pressure switch is the same for all boiler sizes and all altitudes.
  • Intermittent pilot “spark” ignition saves energy.

Cast-iron confidence, Field proven reliability

The Victory VHS is Canada’s best built gas boiler – backed by a lifetime warranty. Its cast-iron design is recognized by heating professionals everywhere as the longest lasting, most durable heat exchanger material.

Installer friendly features engineered into Victory VHS boilers speed installation and service. Factory installed flue discharge components save field assembly.

Slant Fin Victory Gas Medium Temperature Boiler

Slant Fin Victory Gas Medium Temperature Boiler Image

The quality built Victory VHS boiler provides everything you want in a sealed combustion boiler – chimney-less installation, economical price, comfort and safety. It is a reliable cast-iron boiler with a lifetime limited warranty.

  • Input: 60,000 to 180,000 Btu/hr
  • No chimney required
  • Economically priced

Installation versatility – no chimney required

Save construction costs and allow more living space with a Victory VHS sealed combustion boiler. A chimney is not required, so it can be installed in in a closet size space and vented directly through a wall with 3″ stainless steel piping. It’s ideal for homes, apartments, condos and any application where a chimney may not be practical or where an old chimney has deteriorated.

Flexibility In Venting

Chimney or “Type B” venting – with galvanized or stainless steel pipe. Natural draft venting for VHS 90 through VHS 180 boilers. (see manual)

Contractor Friendly Features Speed Installation and Reduce Service Time

  • Horizontal flue outlet with 3-inch connector for better performance.
  • Condensate drain is built into the flue discharge assembly.
  • Drain tube for condensate is factory installed.
  • Junction box for power connection.
  • Pressure switch is the same for all boiler sizes and all altitudes.
  • Intermittent pilot “spark” ignition saves energy.

Cast-iron confidence, Field proven reliability

The Victory VHS is Canada’s best built gas boiler – backed by a lifetime warranty. Its cast-iron design is recognized by heating professionals everywhere as the longest lasting, most durable heat exchanger material.

Installer friendly features engineered into Victory VHS boilers speed installation and service. Factory installed flue discharge components save field assembly.